Skip to main content
03 6278 3029
  • Duration
    • Refresher: Face to Face contact time of at least 7 Hours 30 Mins
    • Face-to-Face: Face to Face contact time of at least 9 Hours
    • Face-to-Face: Face to Face contact time of at least 8 Hours 30 Mins
    • Online with face-to-face assessment: Face to Face contact time of at least 2 Hours
Enquire about course Group Booking Enquiry

Training and assessment delivered and assessed on behalf of Allens Training Pty Ltd RTO 90909

Course Description

This course covers the skills and knowledge required to provide a first aid response and to perform a rescue from live low voltage (LV) electrical apparatus in an electrical industry environment. This does not include overhead lines and underground cables.

It includes the organisational workplace requirements for the inspection and use of LV panel rescue equipment, and how it applies to electricity supply industry (ESI) workers and/or electrical industry workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.

Completing the course will provide an individual with the skills and knowledge to carry out and complete the LV panel rescue procedure and to provide a first aid response to a casualty in a range of situations, in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies. The program also covers the use of industry-standard PPE and rescue equipment, safe approach distances, site-specific hazard review, isolation processes, and emergency response requirements.

Due to the high-risk nature of the industry, this program is regarded as a mandatory requirement for specific roles where employees are required to develop or maintain their professional skills.

Units Delivered

The following units will be included in your certificate:

  • HLTAID009 - Provide cardiopulmonary resuscitation
  • HLTAID010 - Provide basic emergency life support
  • HLTAID011 - Provide First Aid
  • UETDRMP018 - Perform rescue from a live low voltage panel
Course Delivery

This course can be delivered/assessed in the workplace or at facility organised by the training provider.

 Course Durations

Course durations can vary for multiple reasons, so the durations below are the minimum possible amount:

  • Refresher: Face to Face contact time of at least 7 Hours 30 Mins
  • Face-to-Face: Face to Face contact time of at least 9 Hours
  • Online with face-to-face assessment: Face to Face contact time of at least 2 Hours
Entry Requirements

An individual undertaking this course with Allens Training Pty Ltd will need to demonstrate the following to be eligible for entry:

  • An official form of photo identification (e.g., driver’s licence, passport, or student ID).
  • Physical capability to be able to meet the demands of the practical demonstration skills, including CPR*
  • To successfully complete this course, students will need to demonstrate the following language, literacy, numeracy and digital (LLND) skills during training and assessment:
    • Learning: follow safety steps in order, remember what to do in an emergency, and learn by practising.
    • Reading: read and understand emergency signs, safety labels, and rescue instructions related to electrical dangers.
    • Writing: fill in simple forms or record what happened during an emergency or training.
    • Oral communication: speak clearly and listen carefully when giving or receiving information during an emergency situation.
    • Numeracy: read numbers (like voltage or time) and understand basic timing and measurements.
    • Digital Literacy: use a mobile phone or basic device to read messages, follow online instructions, complete online forms or access learning resources.

*Important note: In order to issue an accredited certificate, CPR must be performed on the floor with no exemptions.

Online learning: Students must have basic digital literacy skills to navigate online platforms, complete assessments, and access course materials. Before enrolment, students should assess their ability to engage in online learning. Support is available where required. The online learning program can be found in the student portal. Students must have access to a computer, smart phone, tablet or other electronic device with access to the internet to complete the online studies and associated assessment tasks.

Delivery mode: Online with face-to-face - The online pre-course learning and theory assessment is expected to take approximately 7 hours to complete. These timeframes are estimates. Individuals with prior experience in similar training may complete the online component in less time, while those new to the subject may need more time to complete all the learning content and theory questions.

Assessment Requirements

Individuals undertaking this course will be expected to complete both written and practical assessment tasks.

Certificate Renewal Requirements

The units have the following recommended renewal periods:

UnitPeriod
HLTAID009 - Provide cardiopulmonary resuscitation12 months
HLTAID010 - Provide basic emergency life support36 months
HLTAID011 - Provide First Aid36 months
UETDRMP018 - Perform rescue from a live low voltage panel12 months
Learner Rights, Responsibilities & Support

Please note that enrolment to this course is made with Allens Training Pty Ltd RTO 90909. Please refer to the student handbook located on the RTO website allenstraining.com.au (https://allenstraining.com.au/students/student-handbook) for all details relating to rights and responsibilities including complaints and appeals.

Assessment Activities

Performance tasks and Practical scenarios:

  • Performance Task – Adult CPR (incl. defibrillation and managing an unconscious breathing casualty)*
  • Performance Task – Infant CPR* 
  • Performance Tasks – Medical, Trauma & Environmental (Tasks 1 – 8)
    • Anaphylaxis*
    • Asthma*
    • Choking
    • Non-life-threatening-bleeding, minor wound cleaning & shock
    • Nosebleed
    • Fractures & dislocations
    • Sprains and strains
    • Envenomation (snake/ funnel-web spider bite)
  • Performance Task – Inspect and position LVR Kit and equipment 
  • Simulated Scenario – Perform a rescue from a live LV panel

Documentation:

  • Complete a First Aid Incident Report Form

Theory assessment –A written assessment consisting of multiple-choice questions. 

Core Skill Requirements

Students are required to complete a self evaluation against the following core skills as part of enrolment. This allows the trainer to understand any additional support that may be required during course delivery and assessment.

  • Learning: I can follow instructions and apply emergency response procedures
  • Reading: I can understand safety signs, labels and emergency instructions
  • Writing: I can complete forms and reports clearly
  • Oral communication: I can speak clearly and calmly during emergencies
  • Numeracy: I can use time, counts and simple measurements accurately
Group Workplace Training

We come to your workplace to deliver tailored training sessions for teams of all sizes.

Make a Group Booking
SVG Icon
Same Day Certificates

Complete your training and receive your nationally recognised certificate on the same day.

Trusted by Tasmanians

Tasmania's largest Allens Training partner, delivering formally recognised courses to thousands of individuals and workplaces each year.

Refresher Courses

Keep your certifications current with streamlined refresher courses for previously qualified participants.

Contact Us About This Course